Categories
Jotun Jotun Marathon Std Marathon

Jotun Marathon Std

Welcome to jotun the fast growing paint company. north and south america. americas; argentina; brazil; canada; chile; colombia; dominican republic. Marathon is a high build, highly abrasion and impact resistant, two pack, epoxy coating reinforced with glass flakes. marathon is especially suited for highly corrosive atmospheric and mechanical environments that require a strong coating to endure the test of time. it is also a non-skid coating when used with appropriate aggregate. high solids.

Technical Data Sheet Jotun

Jotunmarathon 550 is a two component polyamine cured epoxy coating for carbon steel, galvanised, stainless steel, aluminium and concrete substrates as a primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. recommended for use in offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Marathon product mixing ratio (by volume) marathon comp a 3part(s) marathon comp b 1part(s) thinner/cleaning solvent thinner: jotun thinner no. 17 nozzle tip (inch/1000): pressure at nozzle (minimum): guiding data for airless spray 25-43 150 bar/2100 psi drying and curing time surface (touch) dry walk-on-dry 14 h5. 5 h3 h 32 h12 h6 h 14 d7 d3 d.

Marathon 500; deskripsi produk cat jotun marathon 500 adalah cat epoxy dua komponen yang menempel dengan polyamine. ini adalah produk yang memiliki toleransi terhadap permukaan, high solid, high build. akan terus menempel saat dibenamkan di air. memiliki ketahanan tinggi terhadap abrasi. Jotun cannot guarantee anything but the quality of the product itself. minor product variations may be implemented in order to comply with local requirements. jotun reserves the right to change the given data without further notice. users should always consult jotun for specific guidance on the general suitability of this product for their needs. Jotun. 7b-27. jotun jotamastic 87 gf jotun jotamastic jotun marathon std 87 gf. 250µm 250µm. 7b-28. jotun marathon jotun marathon. 250µm 250µm. 7b-29. jotun jotamastic sf wg, alum. jotun jotamastic sf. 150µm 200µm. 7b-30. jotun penguard pro gf jotun penguard pro gf. 250µm 250µm. 7b-32. jotun jotamastic sf wg, alum. jotun jotamastic sf wg. 200µm 150µm.

Norsok Approved Coatings Promain

Technical data sheet jotun.

Marathon 500 Jotun

Jotun marathon 1000 gf is a two component polyamine cured epoxy coating. it is a high build, solvent free, glass flake reinforced product. it has very good impact and abrasion resistance. suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Jotunmarathon 500 is a two component polyamine cured epoxy coating. it’s a surface tolerant, high solids, high build product that will continue to cure even when immersed in water. jotun marathon 500 has high abrasion resistance and is suitable for environments with very high corrosivity, such as areas in the splash or tidal zones. This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend jotun marathon 500 as a great alternative. jotun marathon is a two component polyamine cured epoxy coating that is a high solids, high build, glass flake reinforced product. it is scratch and abrasion resistant and is suitable for environments with very high corrosivity. it can be used. A (base) to be mixed thoroughly with 1 part marathon, comp. b (curing agent) pot life (23°c) 1 hour (reduced at higher temperatures) thinner/cleaner jotun thinner no. 17. guiding data airless spray. pressure at nozzle 15 mpa (150 kp/cm², 2100 psi) nozzle tip 0. 63 1. 09 mm (0. 025-0. 043″) spray angle 65 80° filter filters to be removed.

Jotun Marathon Std

Jotun

Contact us registered office: shaw lane industrial estate, ogden road, doncaster, dn2 4se. vat reg: 182 6045 66. reg number: 08472363. A (base) to be mixed thoroughly with 1 jotun marathon std part marathon 500, comp. b (curing agent) induction time 10 minutes. pot life (23°c) 1. 5 hour (reduced at higher temperatures) thinner/cleaner jotun thinner no. 17. guiding data airless spray. pressure at nozzle 17 mpa (170 kp/cm², 2500 psi) nozzle tip 0. 53 0. 69 mm (0. 021-0. 027″) spray angle 40 80°.

Consult jotun’s entire alkydprimer catalogue on nauticexpo. page: 1/5. technical data sheet alkydprimerthinner/cleaning solvent thinner: jotun thinner no. 2 pressure at nozzle (minimum): 150 bar/2100 psi drying and curing time dry to over coat, minimum 28 h 22 h 16 h 10 h for maximum overcoating intervals, refer to the application guide (ag) for this product. A (base) in a 20 litre container and 5 litres jotamastic sf, std comp. b (curing agent) in a 5 litre container (this pack size will be phased out). health and safety please observe the precautionary notices displayed on the container. This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend jotun marathon 500 as a great alternative. jotun marathon is a two component polyamine cured epoxy coating that is a high solids, high build, glass flake reinforced product. it is scratch and abrasion resistant and is suitable for environments with very high corrosivity.

Jotun marathon 500 is a two component polyamine cured epoxy coating that is a surface tolerant, high solids, high build product. this product will continue to cure when immersed in water and has high abrasion resistance. Product description balloxy hb light is a two pack surface tolerant high solids polyamine cured epoxy mastic coating for use at temperatures between -5ºc and 40ºc. available with different hardeners for varying substrate temperatures, standard (std) and wintergrade (wg). Marathon 1000 gf is norsok pre-qualified for systems 1, 4 and 7. mpa 0 15 10 5 0 marathon 1000 gf marathon requirement 1000 xhb mg weight loss 10 100 0 60 0 0 0 marathon 1000 gf marathon requirement 1000 xhb joule 10 8 6 4 2 0 marathon 1000 gf marathon requirement 1000 xhb probably the toughest epoxy coatings in the world. At ultrimax we stock & supply a wide range of industrial primer jotun marathon std paint from leading brands including ultrimax, & jotun. low trade prices. buy online today. order by 2pm for same day dispatch* call for orders & technical advice +44 (0) 1302 856666. toggle navigation. 0.

The coating may be used on other substrates. please contact your local jotun office for more information. condition during application. the temperature of the substrate should be minimum +10°c (std) (-5°c in wg) and at least 3°c above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Jotun marathon is a glass reinforced, scratch and abrasion resistant coating for atmospheric, corrosive and immersed environments. this product is part of the network rail/railtrack rt98 system m21 and n2. jotun marathon is a two component epoxy coating. it is a high solids, high build, glass reinforced product which is scratch and abrasion. Jotunmarathon 500 is a two component polyamine cured epoxy coating that is a surface tolerant, high solids, high build product. this product will continue to cure when immersed in water and has high abrasion resistance. available from promain. co. uk.

Jotun pilot ii. £44. 00 ex vat. jotun vinyguard silvergrey 88. £30. 80 ex vat. 1 to 2 (of 2 products) show all. narrow your search. price clear. 36. 00 54. 00. 1k/2k. A (base) to be mixed thoroughly with 1 part jotamastic 90, std comp. b (curing agent). 3. 5 parts comp. a (base) to be mixed thoroughly with 1 part jotamastic 90, wg comp. b (curing agent). pot life (23°c) std comp. b: 2 hours. wg comp. b: 45 minutes. thinner/cleaner jotun thinner no. 17. guiding data airless spray. Marathon. marathon is a high build, highly abrasion and impact resistant two component coating reinforced with glass flakes. marathon is especially suited for highly corrosive environments that require a strong coating that jotun marathon std will endure the test of time. marathon has a long track record of success on a range of application areas.

Marathon High Build Epoxy Primer Jotun
Jotun Marathon Rawlins Paints