Categories
Jotun Jotun Marathon Red Marathon

Jotun Marathon Red

Jotun marathon 500 is a two component polyamine cured epoxy coating that is a surface tolerant, high solids, high build product. this product will jotun marathon red continue to cure when immersed in water and has high abrasion resistance. More jotun marathon red images.

Jotun Marathon 500 Promain

Probably the toughest epoxy coating in the world marathon 1000 gf is a solvent free, high build, highly abrasionand impact resistant two component epoxy coating reinforced with 20% glass flakes. marathon 1000 gf is a solid barrier coating especially suited for highly corrosive environments where mechanical resistance and long-lasting corrosion protection are of vital. Marathon 550 allows for up to 550 microns in one coat, is applicable on hydroblasted and slightly damp surfaces and will continue to cure under water shortly after application. jotun marathon red suitable for both maintenance and new construction. wide range of colours are available through jotun’s multicolor industry system. Welcome to jotun the fast growing paint company. north and south america. americas; argentina; brazil; canada; chile; colombia; dominican republic. Probably the toughest epoxy coating in the world marathon 1000 gf is a solvent free, high build, highly abrasionand impact resistant two component epoxy coating reinforced with 20% glass flakes. marathon 1000 gf is a solid barrier coating especially suited for highly corrosive environments where mechanical resistance and long-lasting corrosion protection are of vital.

Under certain conditions marathon may be applied in a thickness corresponding to a dft up to 500 µm provided prior approval from jotun tss and accompanying updated application instructions. for further information please contact your local jotun office. approvals. apas approved to specification 0213. norsok m-501, system 7a (ti report 30270 ka02). Under certain conditions marathon may be applied in a thickness corresponding to a dft up to 500 µm provided prior approval from jotun tss and accompanying updated application instructions. for further information please contact your local jotun office. approvals. apas approved to specification 0213. norsok m-501, system 7a (ti report 30270 ka02). Jotun marathon 550 is a two component polyamine cured epoxy coating for carbon steel, galvanised, stainless steel, aluminium and concrete substrates as a primer, mid coat, finish coat or as single coat system jotun marathon red in atmospheric and immersed environments. recommended for use in offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Jotun marathon is a glass reinforced, scratch and abrasion resistant coating for atmospheric, corrosive and immersed environments. this product is part of the network rail/railtrack rt98 system m21 and n2. jotun marathon is a two component epoxy coating. it is a high solids, high build, glass reinforced product which is scratch and abrasion.

Technical Data Sheet Jotun

Jotun Marathon Red

Jotun marathon is especially suited in areas where high scratch resistance is required. ideal for structural steel and piping to be exposed to corrosive environments up to very high and immersed. recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Jotun marathon 1000 gf is a two component polyamine cured epoxy coating. it is a high build, solvent free, glass flake reinforced product. it has very good impact and abrasion resistance. suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Marathon is a high build, highly abrasion and impact resistant, two pack, epoxy coating reinforced with glass flakes. marathon is especially suited for highly corrosive atmospheric and mechanical environments that require a strong coating to endure the test of time. it is also a non-skid coating when used with appropriate aggregate. high solids. A (base) to be mixed thoroughly with 1 part marathon 500, comp. b (curing agent) induction time 10 minutes. pot life (23°c) 1. 5 hour (reduced at higher temperatures) thinner/cleaner jotun thinner no. 17. guiding data airless spray. pressure at nozzle 17 mpa (170 kp/cm², 2500 psi) nozzle tip 0. 53 0. 69 mm (0. 021-0. 027″) spray angle 40 80°.

Marathon 500 Jotun

Jotun Marathon 1000 Gf Distributor Resmi Cat Jotun

Jotun Marathon Rawlins Paints

Marathon product mixing ratio (by volume) marathon comp a 3part(s) marathon comp b 1part(s) thinner/cleaning solvent thinner: jotun thinner no. 17 jotun marathon red nozzle tip (inch/1000): pressure at nozzle (minimum): guiding data for airless spray 25-43 150 bar/2100 psi drying and curing time surface (touch) dry walk-on-dry 14 h5. 5 h3 h 32 h12 h6 h 14 d7 d3 d. Marathon 550 film thickness per coat dry film thickness wet film thickness theoretical spreading rate typical recommended specification range 200 235 4. 3 550 650 1. 5 μm μm m²/l—surface preparation summary table jotun cannot guarantee anything but the quality of the product itself. minor product variations may be implemented in order to.

Marathon High Build Epoxy Primer Jotun

Technical Data Sheet Jotun

This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend jotun marathon 500 as a great alternative. jotun marathon is a two component polyamine cured epoxy coating that is a high solids, high build, glass jotun marathon red flake reinforced product. it is scratch and abrasion resistant and is suitable for environments with very high corrosivity. Marathon. marathon is a high build, highly abrasion and impact resistant two component coating reinforced with glass flakes. marathon is especially suited for highly corrosive environments that require a strong coating that will endure the test of time. marathon has a long track record of success on a range of application areas.

Safety data sheets.