Categories
Jotun Jotun Marathon Iq Marathon

Jotun Marathon Iq

Deskripsi jotun marathon iq tailor-made for ice going vessels, marathon iq is a high build epoxy coating with extreme impact and abrasion resistance. marathon iq is recognised as an ice class coating (lr), offering low surface friction. Please contact your local jotun office for more information. condition during application the temperature of the substrate should be minimum 3ºc above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. tds marathon iq english. 4 pages. tds mammut topcoat english. 3 pages. tds. Marathoniq product mixing ratio (by volume) marathon iq comp a 2part(s) marathon iq / marathon iq gf comp b 1part(s) thinner/cleaning solvent thinner: jotun thinner no. 17 thinning will prolong the drying and curing times. for application on under water hull of ice-going vessels no thinning is allowed. thinning max. : 10% nozzle tip (inch/1000):. Marathoniq on kaksikomponenttinen, polyamiinikovetteinen epoksimaali. se on liuotteeton paksukalvomaali. tuotteella on hyvä naarmuuntumiskestävyys. soveltuu käytettäväksi ympäristöissä, joissa rasitusluokka on hyvin korkea. voidaan käyttää pohja-, välija pintamaalina tai ainoana maalijärjestelmänä ilmastoja upotusrasituksessa.

Jotunmarathon iq2 distributor resmi cat jotun.

Technical Data Sheet Jotun

Jotun Marathon Iq
Marathoniq High Build Ice Quality Epoxy Primer Jotun

Jotun Russian

Jotun marathon iq is a practically solvent free, abrasion resist find out more. jotun vinyguard silvergrey 88 all other jotun coatings. jotun jotun marathon iq vinyguard silvergrey 88 is a fast drying, modified vinyl p find out more. sigmacover 350 all cargo hold dry docking sea stock sigmacover. Marathon iq. tailor-made for ice going vessels, marathon iq is a high build epoxy coating with extreme impact and abrasion resistance. marathon iq is recognised as an ice class coating (lr), offering low surface friction. Mixing 2 parts marathon iq gf comp. a (base) to be mixed thoroughly with 1 part marathon iq/iq gf, comp. b (curing agent) pot life (23°c) 30 minutes (reduced at higher temperatures). thinner/cleaner jotun thinner no. 17, max 10%. guiding data airless spray. pressure at nozzle 20 mpa (200 kp/cm², 2800 psi) nozzle tip 0. 63-1. 09 mm (0. 025-0. 045″).

Jotun marathon iq 2 application. ocean victory 140meter($300m) super yacht visit puerto banus, owner jotun marathon iq billionaire viktor rashnikov duration: 8:14. stefan katafai recommended for you. Marathoniq. tailor-made for ice going vessels, marathoniq is a high build epoxy coating with extreme impact and abrasion resistance. marathon iq is recognised as an ice class coating (lr), offering low surface friction.

Technical data marathon iq product description marathon iq is a practically solvent free, abrasion resistant, two-pack epoxy coating. recommended use steel subject to exstreme mechanical exposure such as underwater areas of ice going vessels including ice breakers. certificate: ice class: recognised low friction surface coating (lr). Please contact your local jotun office for more information. other surfaces. the coating may be used on other substrates. please contact your local jotun office for more information. condition during application. marathon iq gf. jotamastic 87 gf. A (base) to be mixed thoroughly with 1 part marathon iq/iq gf, comp. b (curing agent) pot life (23°c) 30 minutes (reduced at higher temperatures). thinner/cleaner jotun thinner no. 17, max 10%. guiding data airless spray. pressure at nozzle 20 mpa (200 kp/cm², 2800 psi. ). nozzle tip 0. 63-1. 09 mm (0. 025-0. 045″) spray angle 40-80°.

Marathon iq product mixing ratio (by volume) marathon iq comp a 2part(s) marathon iq / marathon iq gf comp b 1part(s) thinner/cleaning solvent thinner: jotun thinner no. 17 thinning will prolong the drying and curing times. for application on under water hull of ice-going vessels no thinning is allowed. thinning max. : 10% nozzle tip (inch/1000):. Tankguard special primer and mid-coat. jotafloor sealer. penguard express zp.

Jotun a/s p. o. box 2021 n-3202 sandefjord, norway tel:+47 33 45 70 00 jotun. com designed by fifth ring, aberdeen, scotland. fifthring. com 05. 2018.

Technical data sheet jotun.

Marathon. marathon is a high build, highly abrasion and impact resistant two component coating reinforced with glass flakes. marathon is especially suited for highly corrosive environments that require a strong coating that will endure the test of time. marathon has a long track record of success on a range of application areas. Marathon iq2 the smoothest and toughest ice resistant coating marathon iq2 combines smoothness and toughness to provide the best hydrodynamic efficiency for ice breakers and ice going vessels. marathon iq2 is recognised as an abrasion resistant ice coating (lr class). tipe produk: anticorrosive coating area penggunaan: marine: for under water hull in newbuilding and. Jotun marathon iq gf is a two component polyamine cured epoxy coating that is high build, solvent free, glass flake reinforced and is highly scratch resistant. suitable for environments with very high corrosivity and can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. suitable for properly prepared carbon steel substrates.

Marathon iq2 comp b 4. 5 marathon iq2 comp a 13. 5 20 5 storage the product must be stored in accordance with national regulations. keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. containers must be kept tightly closed. handle with care. shelf life at 23 °c 12 24 marathon iq2 comp a marathon. Marathon iq2. marathon iq2 the smoothest and toughest ice resistant coating marathon iq2 combines smoothness and toughness to provide the jotun marathon iq best hydrodynamic efficiency for ice breakers and ice going vessels. marathon iq2 is recognised as an abrasion resistant ice coating (lr class). A (base) to be mixed thoroughly with 1 part marathon, comp. b (curing agent) pot life (23°c) 1 hour (reduced at higher temperatures) thinner/cleaner jotun thinner no. 17. guiding data airless spray. pressure at nozzle 15 mpa (150 kp/cm², 2100 psi) nozzle tip 0. 63 1. 09 mm (0. 025-0. 043″) spray angle 65 80° filter filters to be removed. A (base) to be mixed thoroughly with 1 part marathon, comp. b (curing agent) pot life (23°c) 1 hour (reduced at higher temperatures) thinner/cleaner jotun thinner no. 17. guiding data airless spray. pressure at nozzle 15 mpa (150 kp/cm², 2100 psi) nozzle tip 0. 63 1. 09 mm (0. 025-0. 043″) spray angle 65 80° filter filters to be removed.