Categories
Jotun Jotun Marathon 500 Marathon

Jotun Marathon 500

Safety Data Sheet Sml Marine Paints

Boletim Tcnico Marathon 500 Intertintas

Sml marine paints marathon 500.

Marathon 500 comp a 5part(s) marathon 500 comp b 1part(s) thinner/cleaning solvent thinner: jotun thinner no. 17 nozzle tip (inch/1000): pressure at nozzle (minimum): guiding data for airless spray 21-27 170 bar/2500 psi drying and curing time surface (touch) dry walk-on-dry 14 h10 h4 h1. 5 h 24 h18 h8 h3 h substrate temperature 10 °c15 °c23. This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend jotun marathon 500 as a great alternative. jotun marathon is a two component polyamine cured epoxy coating that is a high solids, high build, glass flake reinforced product. it is scratch and abrasion resistant and is suitable for environments jotun marathon 500 with very high corrosivity. A (base) to be mixed thoroughly with 1 part marathon 500, comp. b (curing agent) induction time 10 minutes. pot life (23°c) 1. 5 hour (reduced at higher temperatures) thinner/cleaner jotun thinner no. 17. guiding data airless spray. pressure at nozzle 17 mpa (170 kp/cm², 2500 psi) nozzle tip 0. 53 0. 69 mm (0. 021-0. 027″) spray angle 40 80°. Marathon 500 comp a 5part(s) marathon 500 comp b 1part(s) thinner/cleaning solvent thinner: jotun thinner no. 17 nozzle tip (inch/1000): pressure at nozzle (minimum): guiding data for airless spray 21-27 170 bar/2500 psi drying and curing time surface (touch) dry walk-on-dry 14 h10 h4 h1. 5 h 24 h18 h8 h3 h substrate temperature 10 °c15 °c23.

Marathon 500 comp a contact national poison centre via hospital or registered medical practitioner 21060 not available. jotun paints (europe) ltd. stather road flixborough, scunthorpe north lincolnshire dn15 8rr england tel: +44 17 24 40 00 00 fax: +44 17 24 40 01 00 [email protected] com safety data sheet. Jotun marathon 500 is a two component polyamine cured epoxy coating. it is a surface tolerant, high solids, high build product. will continue to cure when immersed in water. the product has high abrasion resistance. suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. can be used as primer, mid coat, finish coat or as single coat system in. Marathon 500 the ideal primer for steel in splash zones and tidal areas, this 2 pack epoxy primer can be fully immersed within an hour of application, as it continues to cure under water. it will even cure at temperatures as low as 0c.

Jotun Marathon 500 New Guard Coatings

Marathon 500 product description this is a two component polyamine cured epoxy coating. it is a surface tolerant, high solids, high build product. will continue to cure when immersed in water. the product has high abrasion resistance. suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. More jotun marathon 500 images. Marathon 500 page 1 of 4 technical data marathon 500 product description this is a two component, surface tolerant, abrasion resistant, high solids epoxy based primer which will continue to cure when immersed in water. can be applied in high film thickness. recommended use can be used alone or in combination jotun marathon 500 with a topcoat.

Jotun marathon 500 is a two component polyamine cured epoxy coating that is a surface tolerant, high solids, high build product. this product will continue to cure when immersed in water and has high abrasion resistance. Jotun anti karat baltoflake ( cat polyester dengan diperkuat serbuk kaca, yang bisa digunakan untuk menahan abrasi, sangat cocok digunakan di offshore platform, marathon 500 this is a two component jotun marathon 500 polyamine cured epoxy coating. it is a surface tolerant, high solids, high build product.

Jotun Marathon 500 Promain

Marathon. marathon is a high build, highly abrasion and impact resistant two component coating reinforced with glass flakes. marathon is especially suited for highly corrosive environments that require a strong coating that will endure the test of time. marathon has a long jotun marathon 500 track record of success on a range of application areas.

Marathon 550 allows for up to 550 microns in one coat, is applicable on hydroblasted and slightly damp surfaces and will continue to cure under water shortly after application. suitable for both maintenance and new construction. wide range of colours are available through jotun’s multicolor industry system. Welcome to jotun the fast growing paint company. north and south america. americas; argentina; brazil; canada; chile; colombia; dominican republic.

Technical Data Sheet Application Guide Jotun

Jotun Marathon 500

Jotunmarathon rawlins paints.

Jotun marathon 500 is a two component polyamine cured epoxy coating. it’s a surface tolerant, high solids, high build product that will continue to cure even when immersed in water. jotun marathon 500 has high abrasion resistance and is suitable for environments with very high corrosivity, such as areas in the splash or tidal zones. Jotun marathon 500 is a two component polyamine cured epoxy coating. it’s a surface tolerant, high solids, high build product that will continue to cure even when immersed in water. jotun marathon 500 has high abrasion resistance and is suitable for environments with very high corrosivity, such as areas in the splash or tidal zones. ,marathon is a high solids, two-component epoxy coating reinforced with glass flakes. steel and concrete structures subject to aggressive exposure, both atmospheric and mechanical. offers extremely good. excellent protection against corrosion and has outstanding abrasion resistance. proved records for use in high pressure vessels.

Marathon 500 comp a 5parte(s) marathon 500 comp b 1parte(s) diluente/solvente de limpeza diluente: jotun thinner no. 17 orifício do bico (inch/1000): pressão no bico (mínimo): guia de dados para bomba air less 21-27 170 bar/2500 psi tempo de secagem e cura secagem da superfície (ao toque) secagem para pisoteio 14 h10 h4 h1. 5 h 24 h18 h8 h 3 h. Under certain conditions jotun marathon 500 marathon may be applied in a thickness corresponding to a dft up to 500 µm provided prior approval from jotun tss and accompanying updated application instructions. for further information please contact your local jotun office. approvals. apas approved to specification 0213. norsok m-501, system 7a (ti report 30270 ka02). Jotun marathon 500 is a two component polyamine cured epoxy coating that is a surface tolerant, high solids, high build product. this product will continue to cure when immersed in water and has high abrasion resistance. available from promain. co. uk.

Mixing 2 parts marathon iq gf comp. a (base) to be mixed thoroughly with 1 part marathon iq/iq gf, comp. b (curing agent) pot life (23°c) 30 minutes (reduced at higher temperatures). thinner/cleaner jotun thinner no. 17, max 10%. guiding data airless spray. pressure at nozzle 20 mpa (200 kp/cm², 2800 psi) nozzle tip 0. 63-1. 09 mm (0. 025-0. 045″). Marathon 500 est un revêtement époxydique applicable à tous types de surface notamment aux structures en acier et aux tuyauteries exposées à des environnements coercitifs. Marathon 500 products primarily meant for use as primers and antifoulings may have slight color variations from batch to batch. such products may fade and chalk when exposed to sunlight and weathering. the information in this document is given to the best of jotun’s knowledge, based on laboratory testing and practical experience.