Categories
Jotun Jotun Marathon 500 Tds Marathon

Jotun Marathon 500 Tds

,marathon is a high solids, two-component epoxy coating reinforced with glass flakes. steel and concrete structures subject to aggressive exposure, both atmospheric and mechanical. offers extremely good. excellent protection against corrosion and has outstanding abrasion resistance. proved records for use in high pressure vessels. Thinner/cleaner jotun thinner no. 2. drying time. drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly. the figures given in the table are typical with: marathon 500. penguard express. penguard fc. Marathon. marathon is a high build, highly abrasion and impact resistant two component coating reinforced with glass flakes. marathon is especially suited for highly corrosive environments that require a strong coating that will endure the test of time. marathon has a long track record of success on a range of application areas. The technical data sheet (tds) is recommended to be read in conjunction with the safety data sheet (sds) and the application guide (ag) for this product. for your nearest local jotun office, please visit our website at www. jotun. com.

Marathon500 comp a 5parte(s) marathon 500 comp b 1parte(s) diluente/solvente de limpeza diluente: jotun thinner no. 17 orifício do bico (inch/1000): pressão no bico (mínimo): guia de dados para bomba air less 21-27 170 bar/2500 psi tempo de secagem e cura secagem da superfície (ao toque) secagem para pisoteio 14 h10 h4 h1. 5 h 24 h18 h8 h 3 h. Jotunmarathon500 is a two component polyamine cured epoxy coating. it’s a surface tolerant, high solids, high build product that will continue to cure even when immersed in water. jotun marathon 500 has high abrasion resistance and is suitable for environments with jotun marathon 500 tds very high corrosivity, such as areas in the splash or tidal zones.

Finaltouch® ultra touch-up latex wall paint flat 62 line fire retardant paint latex intumescent coating flat finish fr-110 fire retardant paint latex intumescent coating flat finish fr-210 flattening additive 1b. 500 flow additive 1b. 210 freezer-kote interior enamel high-gloss fk-13xx fresh start® exterior wood primer 094 fresh start® high. Marathon 500 comp a 5parte(s) marathon 500 comp b 1parte(s) diluente/solvente de limpeza diluente: jotun thinner no. 17 orifício do bico (inch/1000): pressão no bico (mínimo): guia de dados para bomba air less 21-27 170 bar/2500 psi tempo de secagem e cura secagem da superfície (ao toque) secagem para pisoteio 14 h10 h4 h1. 5 h 24 h18 h8 h 3 h.

Jotun Marathon 500 Promain

Marathon500 product description this is a two component polyamine cured epoxy coating. it is a surface tolerant, high solids, high build product. will continue to cure when immersed in water. the product has high abrasion resistance. suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. Marathon500; quick view. quick view jotun,jotun,jotun multi color industry,jotun multicolor industry,cat jotun,cat jotun,cat jotun indonesia,cat jotun indonesia,jotun indonesia,jotun indonesia,jotun jakarta,jotun jakarta,coloring and protecting,multicolor industry jotun marathon 500 tds and coating specialist,authorized dealer cat jotun,dealer cat jotun,dealer. Marathon 500 page 1 of 4 technical data marathon 500 product description this is a two component, surface tolerant, abrasion resistant, high solids epoxy based primer which will continue to cure when immersed in water. can be applied in high film thickness. recommended use can be used alone or in combination with a topcoat. A (base) to be mixed thoroughly with 1 part marathon 500, comp. b (curing agent) induction time 10 minutes. pot life (23°c) 1. 5 hour (reduced at higher temperatures) thinner/cleaner jotun thinner no. 17. guiding data airless spray. pressure at nozzle 17 mpa (170 kp/cm², 2500 psi) nozzle tip 0. 53 0. 69 mm (0. 021-0. 027″) spray angle 40 80°.

Technical Data Sheet Jotun

Jotun marathon 500 is a two component polyamine cured epoxy coating that is a surface tolerant, high solids, high build product. this product will continue to cure when immersed in water and has high abrasion resistance. Marathon500 page 1 of 4 technical data marathon 500 product description this is a two component, surface tolerant, abrasion resistant, high solids epoxy based primer which will continue to cure when immersed in water. can be applied in high film thickness. recommended use can be used alone or in combination with a topcoat. Jotun marathon 500 is a two component polyamine cured epoxy coating. it’s a surface tolerant, high solids, high build product that will continue to cure even when immersed in water. jotun marathon 500 has high abrasion resistance and is suitable for environments with very high corrosivity, such as areas in the jotun marathon 500 tds splash or tidal zones. Marathon500 comp a 5part(s) marathon 500 comp b 1part(s) thinner/cleaning solvent thinner: jotun thinner no. 17 nozzle tip (inch/1000): pressure at nozzle (minimum): guiding data for airless spray 21-27 170 bar/2500 psi drying and curing time surface (touch) dry walk-on-dry 14 h10 h4 h1. 5 h 24 h18 h8 h3 h substrate temperature 10 °c15 °c23.

Film thickness, wet (µm) 250 500 310 theoretical spreading rate (m²/l) 4 2 3,2 comments under certain conditions marathon may be applied in a thickness corresponding to a dft up to 500 µm provided prior approval from jotun tss and accompanying updated application instructions. for further information please contact your local jotun office. Access all technical data sheets (tds) for all benjamin moore coatings. access all technical data sheets (tds) for all benjamin moore coatings. ultra spec hp® d. t. m. acrylic semi-gloss enamel hp29 ultra spec hp® d. t. m. acrylic semi-gloss enamel wh29 ultra spec® 500 interior eggshell finish n538 ultra spec® 500 interior flat finish n536. Marathon 500 comp a 5part(s) marathon 500 comp b 1part(s) thinner/cleaning solvent thinner: jotun thinner no. 17 nozzle tip (inch/1000): pressure at nozzle (minimum): guiding data for airless spray 21-27 170 bar/2500 psi drying and curing time surface (touch) dry walk-on-dry 14 h10 h4 h1. 5 h 24 h18 h8 h3 h substrate temperature 10 °c15 °c23. Marathon500 comp a 5part(s) marathon 500 comp b 1part(s) thinner/cleaning solvent thinner: jotun jotun marathon 500 tds thinner no. 17 nozzle tip (inch/1000): pressure at nozzle (minimum): guiding data for airless spray 21-27 170 bar/2500 psi drying and curing time surface (touch) dry walk-on-dry 14 h 10 h 4 h 1. 5 h 24 h 18 h 8 h 3 h substrate temperature 10 °c 15.

Technical Data Sheet Marathon 500 Pentaniaga

The technical data sheet (tds) is recommended to be read in conjunction with the safety data sheet (sds) and the 500 2 μm μm m²/l—surface preparation summary table jotun cannot guarantee anything but the quality of the product itself. minor product variations may be implemented in order to comply with local requirements. Jotunmarathon500 is a two component polyamine cured epoxy coating. it is a surface tolerant, high solids, high build product. will continue to cure when immersed in water. the product has high abrasion resistance. suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. can be used as primer, mid coat, finish coat or as single coat system in.

Marathon500 products primarily meant for use as primers and antifoulings may have slight color variations from batch to batch. such products may fade and chalk when exposed to sunlight and weathering. the information in this document is given to the best of jotun’s knowledge, based on laboratory testing and practical experience. Jotunmarathon500 is a two component polyamine cured epoxy coating that is a surface tolerant, high solids, high build product. this product will continue to cure when immersed in water and has high abrasion resistance. available from promain. co. uk. Marathon 500 products primarily meant for use as primers and antifoulings may have slight color variations from batch to batch. such products may fade and chalk when exposed to sunlight and weathering. the information in this document is given to the best of jotun’s knowledge, based on laboratory testing and practical experience. Marathon500. select options. home / primer (tds) is recommended to be read in conjunction with the safety data sheet (sds) and the application guide (ag) for this product. tankguard hb,jotatemp 650 coating,muki z 2001,aluminium paint hr,resist 65,jotamastic 90 tds,barrier zep,jotaprime 500,hardtop ax coating,jotun hardtop ax paint.

Technical Data Sheet Jotun

Under certain conditions marathon may be applied in a thickness corresponding to a dft up to 500 µm provided prior approval from jotun tss and accompanying updated application instructions. for further information please contact your local jotun office. approvals. apas approved to specification 0213. norsok m-501, system 7a (ti report 30270 ka02). This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend jotun marathon 500 as a great alternative. jotun marathon is a two component polyamine cured epoxy coating that is a high solids, high build, glass flake reinforced product. it is scratch and abrasion resistant and is suitable for environments with very high corrosivity.