Jotun marathon 500 promain.
Colour charts paintmarine. co. uk.
Marathon Special Products
A (base) to be mixed thoroughly with 1 part marathon 500, comp. b (curing agent) induction time 10 minutes. pot life (23°c) 1. 5 hour (reduced at higher temperatures) thinner/cleaner jotun thinner no. 17. guiding data airless spray. pressure at nozzle 17 mpa (170 kp/cm², 2500 psi) nozzle tip 0. 53 0. 69 mm (0. 021-0. 027″) spray angle 40 80°. Jotun marathon is a glass reinforced, scratch and abrasion resistant coating for atmospheric, corrosive and immersed environments. this product is part of the network rail/railtrack rt98 system m21 and n2. jotun marathon is a two component epoxy coating. it is a high solids, high build, glass reinforced product which is scratch and abrasion. Consult jotun’s entire alkydprimer catalogue on nauticexpo. page: 1/5. technical data sheet alkydprimerthinner/cleaning solvent thinner: jotun thinner no. 2 pressure at nozzle (minimum): 150 bar/2100 psi drying and curing time dry to over coat, minimum 28 h 22 h 16 h 10 h for maximum overcoating intervals, refer to the application guide (ag) for this product. Marathon. marathon is a high build, highly abrasion and impact resistant two component coating reinforced with glass flakes. marathon is especially suited for highly corrosive environments that require a strong coating that will endure the test of time. marathon has a long track record of success on a range of application areas.
The coating may be used on other substrates. please contact your local jotun office for more information. condition during application. the temperature of the substrate should be minimum +10°c (std) (-5°c in wg) and at least 3°c above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. A (base) to be mixed thoroughly with 1 part jotamastic 90, std comp. b (curing agent). 3. 5 parts comp. a (base) to be mixed thoroughly with 1 part jotamastic 90, wg comp. b (curing agent). pot life (23°c) std comp. b: 2 hours. wg comp. b: 45 minutes. thinner/cleaner jotun thinner no. 17. guiding data airless spray. Jotun protects property futura classic product description this is a two component chemically curing aliphatic acrylic polyurethane coating. it has a glossy finish with good gloss retention. it is a jotun marathon std 6081 high solids product. the product has good application properties with low dry spray. to be used as topcoat in atmospheric environments. Contact your local jotun office for product availability in your country. the safety data sheets contain important information about health-, safetyand environmental aspects for each specific product. however, not all products are produced/stocked at all factories/stock points worldwide.
Balloxy Hb Light Jotun
Marathon 550 allows for up to 550 microns in one coat, is applicable on hydroblasted and slightly damp surfaces and will continue to cure under water shortly after application. suitable for both maintenance and new construction. wide range of colours are available through jotun’s multicolor industry system. At ultrimax we stock & supply a wide range of industrial primer paint from leading brands including ultrimax, & jotun. low trade prices. buy online today. order by 2pm for same day dispatch* call for orders & technical advice +44 (0) 1302 856666. toggle navigation. 0.
Jotun standard colours bs381c colours bs4800 colours ral k7 colours. jotun standard colours. white 001. black 099. light sand 1148. blue 129. orange 135. grey 136. green 137. blue 138. blue 139. grey 149. yellow 2. red 2079. chestnut brown 2175. green 257. yellow 258. grey 38. grey 403. yellow 414. green 431. grey 433. orange 436. green 437. This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend jotun marathon 500 as a great alternative. jotun marathon is a two component polyamine cured epoxy coating that is a high solids, high build, glass flake reinforced product. it is scratch and jotun marathon std 6081 abrasion resistant and is suitable for environments with very high corrosivity. Marathon primagal coating safety data sheet marathon primagalv coating page 4 of 5 chemical stability: stable when stored in sealed container at normal temperatures and in a suitable location. evaporation will occur if the containers are not sealed correctly. agitation of the substance in storage containers may produce a build up of. Marathon 500; deskripsi produk cat jotun marathon 500 adalah cat epoxy dua komponen yang menempel dengan polyamine. ini adalah produk yang memiliki toleransi terhadap permukaan, high solid, high build. akan terus menempel saat dibenamkan di air. memiliki ketahanan tinggi terhadap abrasi.
Product description jotamastic 80 mio is a high solids two-pack micaceous iron oxide pigmented, surface-tolerant epoxy mastic coating which can be applied in low film thickness. available with different hardeners for varying substrate temperatures, standard (std) and wintergrade (wg). Product description balloxy hb light is a two pack surface tolerant high solids polyamine cured epoxy mastic coating for use at temperatures between -5ºc and 40ºc. available with different hardeners for varying substrate temperatures, standard (std) and wintergrade (wg).
Jotamastic 87 Gf
More jotun marathon std 6081 images. A (base) to be mixed thoroughly with 1 part marathon, comp. b (curing agent) pot life (23°c) 1 hour (reduced at higher temperatures) thinner/cleaner jotun thinner no. 17. guiding data airless spray. pressure at nozzle 15 mpa (150 kp/cm², 2100 psi) nozzle tip 0. 63 1. 09 mm (0. 025-0. 043″) spray angle 65 80° filter filters to be removed. Marathon product mixing ratio (by volume) marathon comp a 3part(s) marathon comp b 1part(s) thinner/cleaning solvent thinner: jotun thinner no. 17 nozzle tip (inch/1000): pressure at nozzle (minimum): guiding data for airless spray jotun marathon std 6081 25-43 150 bar/2100 psi drying and curing time surface (touch) dry walk-on-dry 14 h5. 5 h3 h 32 h12 h6 h 14 d7 d3 d. Jotun marathon 1000 gf is a two component polyamine cured epoxy coating. it is a high build, solvent free, glass flake reinforced product. it has very good impact and abrasion resistance. suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments.
A (base) in a 20 litre container and 5 litres jotamastic sf, std comp. b (curing agent) in a 5 litre container (this pack size will be phased jotun marathon std 6081 out). health and safety please observe the precautionary notices displayed on the container. Colour white, std 38, std 49, std 137 and black solids (vol %)* 44 clean, dry and undamaged compatible primer. please contact your local jotun office for more information. marathon iq. marathon iq gf. jotamastic 87 gf. Contact us registered office: shaw lane industrial estate, ogden road, doncaster, dn2 4se. vat reg: 182 6045 66. reg number: 08472363. Jotun marathon 500 is a two component polyamine cured epoxy coating that is a surface tolerant, high solids, high build product. this product will continue to cure when immersed in water and has high abrasion resistance.
Marathon proporcje mieszania produktu (obj. ) marathon comp a 3część(i) marathon comp b 1część(i) rozcieńczalnik/zmywacz rozcieńczalnik: jotun thinner no. 17 dysza (inch/1000): ciśnienie w dyszy (minimum): wytyczne dane dla natrysku bezpowietrznego 25-43 150 bar/2100 psi czas schnięcia i utwardzania powierzchnia sucha (na dotyk). The marathon is running’s most sought-after race. this is the perfect spot to fill out your marathon calendar, pick up marathon training tips and connect with other runners around the globe.